Autopa RetractaPosts 745mm (Padlockable)

The RetractaPost is a simple, cost effective, yet highly effective way to prevent unwanted vehicle access. The RetractaPost is raised and lowered vertically. When lowered the post is fully below ground and covered using the integral lid. The post is padlockable (padlock not supplied) in the raised position by first rotating the post 45° and then attaching the padlock between the post to the lid. The RetractaPost is ideal for protecting vehicle forecourts, commercial premises, car parks and domestic driveways. 

The RetractaPost 500 is 745mm above ground in the raised position. It is recommended that posts are placed no further than 1,200mm apart to ensure no vehicle may pass between the raised posts. An excavated hole (no less than 900mm deep and 300mm diameter) is required for installation. Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400mm must be concrete. The lid of the post should be no more than 10mm above finished ground level.
This product is guaranteed for 12 months (if installed and used correctly).

- 745mm (Height above ground when raised)
- Socket - 1010mm (below ground)
- 3mm wall thickness - Galvanised and galvanised & colour - 2mm wall thickness - Stainless steel

7 - 10 day delivery.

12 month warranty.

- It is recommended that posts are placed no further than 1,200mm apart to ensure no vehicle may pass between the raised posts.
- An excavated hole (no less than 1,200mm deep and 300mm diameter) is required for installation.
- Provision for suitable drainage must be made (chippings or similar) at the bottom of the hole. The uppermost 3-400mm must be concrete.
- The lid of the post should be no more than 10mm above finished ground level.
- This product is guaranteed for 12 months (if installed and used correctly).

Please see our Autop FAQ here.